Introduction
Enhance your Arduino projects by learning how to display data from the Serial Monitor onto a 16×2 LCD Display module. This tutorial will guide you Serial Monitor to LCD Display Arduino Tutorial, through the process of connecting a 16×2 LCD Display to an Arduino Nano and programming it to showcase real-time information sent from the Serial Monitor. By establishing the correct connections and utilizing the provided Arduino code, you can create a versatile display system that bridges the gap between your Arduino projects and the Serial Monitor.
Hardware Required
You will require the following Hardware Components for How To Display Message On LCD Using Serial Monitor Of Arduino.
Components | # | Buy From Amazon |
---|---|---|
Arduino Nano | 1 | Buy Now |
16×2 LCD Display module | 1 | Buy Now |
9v DC Adapter (Optional) | 1 | Buy Now |
Jumper Wires | Few | Buy Now |
Breadboard | 1 | Buy Now |
Creating the Connection
Follow these steps to connect the 16×2 LCD Display module to the Arduino Nano:
- Connect the VCC pin of the LCD Display to the 5V pin on the Arduino Nano.
- Connect the GND pin of the LCD Display to the GND pin on the Arduino Nano.
- Connect the SDA (Serial Data) pin of the LCD Display to the A4 pin on the Arduino Nano.
- Connect the SCL (Serial Clock) pin of the LCD Display to the A5 pin on the Arduino Nano.
Circuit Diagram
The following circuit shows you the connection of the Serial Monitor to LCD Display Arduino Tutorial Please make the connection carefully
Installing Arduino IDE Software
First, you will require to Download the updated version of Arduino IDE Software and Install it on your PC or laptop. if you Learn How to install the Arduino step-by-step guide then click on how to install Arduino Button given Blow
Installing Libraries
Now when you are Ready to upload the code, to the Arduino Board you will need first to add the Following Libraries in Arduino, If you Learn How to add the library in the Arduino step-by-step guide click on how to install the library Button given Blow
Code
Use the following Arduino code to display data from the Serial Monitor onto the 16×2 LCD Display module:
//For more Projects: www.arduinocircuit.com
#include <Wire.h>
#include <LiquidCrystal_I2C.h>
LiquidCrystal_I2C lcd(0x27, 16, 2); // Set the LCD address to 0x27 for a 16x2 display
void setup() {
Serial.begin(9600);
lcd.init(); // Initialize the LCD
lcd.backlight(); // Turn on the backlight
lcd.clear(); // Clear the LCD screen
lcd.setCursor(0, 0);
lcd.print("Serial Monitor");
lcd.setCursor(0, 1);
lcd.print("to LCD Display");
delay(2000); // Display the startup message for 2 seconds
lcd.clear(); // Clear the LCD screen
}
void loop() {
while (Serial.available() > 0) {
lcd.clear(); // Clear the LCD screen
lcd.setCursor(0, 0);
lcd.print("Received: ");
char receivedChar = Serial.read(); // Read a character from Serial Monitor
lcd.setCursor(0, 1);
lcd.print(receivedChar); // Display the received character on the LCD
}
}
Applications
The Serial Monitor to LCD Display project has various applications, including:
- Real-Time Data Display: Showcase real-time information or sensor data on the LCD.
- Debugging Tool: Display debugging messages or variable values during the development process.
- Information Display: Present important messages or instructions to users using the LCD.
- Interactive Displays: Create interactive projects where user input from the Serial Monitor is reflected on the LCD.
Conclusion
By following this tutorial, you’ve learned how to display data from the Serial Monitor onto a 16×2 LCD Display module using an Arduino Nano. We discussed the necessary components, provided clear connections, and offered a functional Arduino code for the project. Now you have the knowledge to create your own versatile display system that bridges the gap between your Arduino projects and the Serial Monitor, adding a new level of interactivity and functionality.