R308 Fingerprint Sensor | Arduino Tutorial

Introduction

In this tutorial we will learn about R308 Fingerprint Sensor | Arduino Tutorial, In today’s world, where security is of utmost importance, biometric technology has emerged as a reliable solution. Among the various biometric modalities, fingerprint recognition has gained significant recognition due to its accuracy and convenience.

One prominent player in this field is the R308 Fingerprint Sensor. This revolutionary sensor brings cutting-edge capabilities to the realm of fingerprint recognition, making it a preferred choice for numerous applications. In this article, we will delve into the world of the R308 Fingerprint Sensor, exploring its features, specifications, and diverse applications.

Hardware Required

You will require the following Hardware Components for interfacing R308 Fingerprint Sensor | Arduino Tutorial.

What is R308 Fingerprint Sensor?

The R308 Fingerprint Sensor is an advanced biometric device that enables secure and accurate fingerprint recognition. With its state-of-the-art technology, this sensor captures and analyzes unique fingerprint patterns to authenticate individuals. The R308 Sensor operates by capturing high-resolution images of fingerprints and processing them through advanced algorithms for identification and verification purposes. Its integration with the Arduino UNO microcontroller board allows for seamless implementation and control.

Pinout

Pin Configuration

Specifications of the R308 Fingerprint Sensor

• Sensor resolution and image quality
• Fingerprint capture speed and recognition time
• False acceptance rate (FAR) and false rejection rate (FRR)
• Operating voltage and power consumption
• Communication interface and compatibility with Arduino UNO

Features of the R308 Fingerprint Sensor

• High accuracy and reliability in fingerprint recognition
• Fast and efficient fingerprint capture and matching process
• Easy integration with Arduino UNO and other microcontroller platforms
• Secure storage of fingerprint templates
• User-friendly software development kit (SDK) for simplified implementation
• Anti-spoofing measures for enhanced security
• Compact and durable design for versatile applications
• Wide operating temperature range for adaptability in various environments

Working of R308 Fingerprint Sensor

The primary function of the R308 Fingerprint Sensor is to accurately capture and verify fingerprints. When a user places their finger on the sensor’s surface, it illuminates the finger and captures an optical image. The captured image is then converted into a digital format and processed using advanced algorithms. These algorithms analyze the image to extract minutiae points, which are unique features of the fingerprint, such as ridge endings and bifurcations. The R308 sensor then creates a mathematical template based on these minutiae points, which serves as a digital representation of the fingerprint. This template can be compared with pre-stored templates to verify the identity of the individual. Additionally, the R308 sensor has the capability to store multiple fingerprints and perform matching against a database of enrolled fingerprints, enabling quick and reliable identification in various applications, such as access control and attendance systems.

Circuit Diagram

The following circuit shows you the connection of the R308 Fingerprint Sensor | Arduino Tutorial Please make the connection carefully

Circuit Connections

Installing Arduino IDE Software

First, you will require to Download the updated version of Arduino IDE Software and Install it on your PC or laptop. if you Learn How to install the Arduino step-by-step guide then click on how to install Arduino Button given Blow

Installing Libraries

Now when you are Ready to upload the code, to the Arduino Board you will need first to add the Following Libraries in Arduino, If you Learn How to add the library in the Arduino step-by-step guide click on how to install the library Button given Blow

• Adafruit Fingerprint Library

Code

Upload the following code to your Arduino.

//For more Projects: www.arduinocircuit.com

#include <Adafruit_Fingerprint.h>

// On Leonardo/Micro or others with hardware serial, use those! #0 is green wire, #1 is white
// uncomment this line:
// #define mySerial Serial1

// For UNO and others without hardware serial, we must use software serial...
// pin #2 is IN from sensor (GREEN wire)
// pin #3 is OUT from arduino  (WHITE wire)
// comment these two lines if using hardware serial
SoftwareSerial mySerial(2, 3);

Adafruit_Fingerprint finger = Adafruit_Fingerprint(&mySerial);

uint8_t id;

void setup()  
{
  Serial.begin(9600);
  while (!Serial);  // For Yun/Leo/Micro/Zero/...
  delay(100);
  Serial.println("\n\nAdafruit Fingerprint sensor enrollment");

  // set the data rate for the sensor serial port
  finger.begin(57600);
  
  if (finger.verifyPassword()) {
    Serial.println("Found fingerprint sensor!");
  } else {
    Serial.println("Did not find fingerprint sensor :(");
    while (1) { delay(1); }
  }
}

uint8_t readnumber(void) {
  uint8_t num = 0;
  
  while (num == 0) {
    while (! Serial.available());
    num = Serial.parseInt();
  }
  return num;
}

void loop()                     // run over and over again
{
  Serial.println("Ready to enroll a fingerprint!");
  Serial.println("Please type in the ID # (from 1 to 127) you want to save this finger as...");
  id = readnumber();
  if (id == 0) {// ID #0 not allowed, try again!
     return;
  }
  Serial.print("Enrolling ID #");
  Serial.println(id);
  
  while (!  getFingerprintEnroll() );
}

uint8_t getFingerprintEnroll() {

  int p = -1;
  Serial.print("Waiting for valid finger to enroll as #"); Serial.println(id);
  while (p != FINGERPRINT_OK) {
    p = finger.getImage();
    switch (p) {
    case FINGERPRINT_OK:
      Serial.println("Image taken");
      break;
    case FINGERPRINT_NOFINGER:
      Serial.println(".");
      break;
    case FINGERPRINT_PACKETRECIEVEERR:
      Serial.println("Communication error");
      break;
    case FINGERPRINT_IMAGEFAIL:
      Serial.println("Imaging error");
      break;
    default:
      Serial.println("Unknown error");
      break;
    }
  }

  // OK success!

  p = finger.image2Tz(1);
  switch (p) {
    case FINGERPRINT_OK:
      Serial.println("Image converted");
      break;
    case FINGERPRINT_IMAGEMESS:
      Serial.println("Image too messy");
      return p;
    case FINGERPRINT_PACKETRECIEVEERR:
      Serial.println("Communication error");
      return p;
    case FINGERPRINT_FEATUREFAIL:
      Serial.println("Could not find fingerprint features");
      return p;
    case FINGERPRINT_INVALIDIMAGE:
      Serial.println("Could not find fingerprint features");
      return p;
    default:
      Serial.println("Unknown error");
      return p;
  }
  
  Serial.println("Remove finger");
  delay(2000);
  p = 0;
  while (p != FINGERPRINT_NOFINGER) {
    p = finger.getImage();
  }
  Serial.print("ID "); Serial.println(id);
  p = -1;
  Serial.println("Place same finger again");
  while (p != FINGERPRINT_OK) {
    p = finger.getImage();
    switch (p) {
    case FINGERPRINT_OK:
      Serial.println("Image taken");
      break;
    case FINGERPRINT_NOFINGER:
      Serial.print(".");
      break;
    case FINGERPRINT_PACKETRECIEVEERR:
      Serial.println("Communication error");
      break;
    case FINGERPRINT_IMAGEFAIL:
      Serial.println("Imaging error");
      break;
    default:
      Serial.println("Unknown error");
      break;
    }
  }

  // OK success!

  p = finger.image2Tz(2);
  switch (p) {
    case FINGERPRINT_OK:
      Serial.println("Image converted");
      break;
    case FINGERPRINT_IMAGEMESS:
      Serial.println("Image too messy");
      return p;
    case FINGERPRINT_PACKETRECIEVEERR:
      Serial.println("Communication error");
      return p;
    case FINGERPRINT_FEATUREFAIL:
      Serial.println("Could not find fingerprint features");
      return p;
    case FINGERPRINT_INVALIDIMAGE:
      Serial.println("Could not find fingerprint features");
      return p;
    default:
      Serial.println("Unknown error");
      return p;
  }
  
  // OK converted!
  Serial.print("Creating model for #");  Serial.println(id);
  
  p = finger.createModel();
  if (p == FINGERPRINT_OK) {
    Serial.println("Prints matched!");
  } else if (p == FINGERPRINT_PACKETRECIEVEERR) {
    Serial.println("Communication error");
    return p;
  } else if (p == FINGERPRINT_ENROLLMISMATCH) {
    Serial.println("Fingerprints did not match");
    return p;
  } else {
    Serial.println("Unknown error");
    return p;
  }   
  
  Serial.print("ID "); Serial.println(id);
  p = finger.storeModel(id);
  if (p == FINGERPRINT_OK) {
    Serial.println("Stored!");
  } else if (p == FINGERPRINT_PACKETRECIEVEERR) {
    Serial.println("Communication error");
    return p;
  } else if (p == FINGERPRINT_BADLOCATION) {
    Serial.println("Could not store in that location");
    return p;
  } else if (p == FINGERPRINT_FLASHERR) {
    Serial.println("Error writing to flash");
    return p;
  } else {
    Serial.println("Unknown error");
    return p;
  } 
}  

Open serial monitor once the code is uploaded.

The device is waiting for you to enter an ID.

Code 2

After defining your fingerprint, upload the following code to Arduino.

//For more Projects: www.arduinocircuit.com

#include <Adafruit_Fingerprint.h>

// On Leonardo/Micro or others with hardware serial, use those! #0 is green wire, #1 is white
// uncomment this line:
// #define mySerial Serial1

// For UNO and others without hardware serial, we must use software serial...
// pin #2 is IN from sensor (GREEN wire)
// pin #3 is OUT from arduino  (WHITE wire)
// comment these two lines if using hardware serial
SoftwareSerial mySerial(2, 3);

Adafruit_Fingerprint finger = Adafruit_Fingerprint(&mySerial);

void setup()  
{
  Serial.begin(9600);
  while (!Serial);  // For Yun/Leo/Micro/Zero/...
  delay(100);
  Serial.println("\n\nAdafruit finger detect test");

  // set the data rate for the sensor serial port
  finger.begin(57600);
  
  if (finger.verifyPassword()) {
    Serial.println("Found fingerprint sensor!");
  } else {
    Serial.println("Did not find fingerprint sensor :(");
    while (1) { delay(1); }
  }

  finger.getTemplateCount();
  Serial.print("Sensor contains "); Serial.print(finger.templateCount); Serial.println(" templates");
  Serial.println("Waiting for valid finger...");
}

void loop()                     // run over and over again
{
  getFingerprintIDez();
  delay(50);            //don't ned to run this at full speed.
}

uint8_t getFingerprintID() {
  uint8_t p = finger.getImage();
  switch (p) {
    case FINGERPRINT_OK:
      Serial.println("Image taken");
      break;
    case FINGERPRINT_NOFINGER:
      Serial.println("No finger detected");
      return p;
    case FINGERPRINT_PACKETRECIEVEERR:
      Serial.println("Communication error");
      return p;
    case FINGERPRINT_IMAGEFAIL:
      Serial.println("Imaging error");
      return p;
    default:
      Serial.println("Unknown error");
      return p;
  }

  // OK success!

  p = finger.image2Tz();
  switch (p) {
    case FINGERPRINT_OK:
      Serial.println("Image converted");
      break;
    case FINGERPRINT_IMAGEMESS:
      Serial.println("Image too messy");
      return p;
    case FINGERPRINT_PACKETRECIEVEERR:
      Serial.println("Communication error");
      return p;
    case FINGERPRINT_FEATUREFAIL:
      Serial.println("Could not find fingerprint features");
      return p;
    case FINGERPRINT_INVALIDIMAGE:
      Serial.println("Could not find fingerprint features");
      return p;
    default:
      Serial.println("Unknown error");
      return p;
  }
  
  // OK converted!
  p = finger.fingerFastSearch();
  if (p == FINGERPRINT_OK) {
    Serial.println("Found a print match!");
  } else if (p == FINGERPRINT_PACKETRECIEVEERR) {
    Serial.println("Communication error");
    return p;
  } else if (p == FINGERPRINT_NOTFOUND) {
    Serial.println("Did not find a match");
    return p;
  } else {
    Serial.println("Unknown error");
    return p;
  }   
  
  // found a match!
  Serial.print("Found ID #"); Serial.print(finger.fingerID); 
  Serial.print(" with confidence of "); Serial.println(finger.confidence); 

  return finger.fingerID;
}

// returns -1 if failed, otherwise returns ID #
int getFingerprintIDez() {
  uint8_t p = finger.getImage();
  if (p != FINGERPRINT_OK)  return -1;

  p = finger.image2Tz();
  if (p != FINGERPRINT_OK)  return -1;

  p = finger.fingerFastSearch();
  if (p != FINGERPRINT_OK)  return -1;
  
  // found a match!
  Serial.print("Found ID #"); Serial.print(finger.fingerID); 
  Serial.print(" with confidence of "); Serial.println(finger.confidence);
  return finger.fingerID; 
}

Applications of the R308 Fingerprint Sensor

• Access control systems for secure entry to buildings and restricted areas
• Time and attendance management in workplaces and educational institutions
• Biometric authentication for personal devices and applications
• Identification and verification in banking and financial services
• Employee tracking and management systems
• Health and medical records management for accurate patient identification
• Border control and immigration processes for enhanced security
• Criminal identification and forensic investigations

Conclusion

The R308 Fingerprint Sensor revolutionizes the field of fingerprint recognition with its exceptional accuracy, reliability, and user-friendly features. Its seamless integration with the Arduino UNO board makes it accessible to developers and enthusiasts alike. Whether it’s securing access to buildings, enhancing attendance management, or providing reliable identification in various sectors, the R308 Sensor emerges as a reliable and efficient solution. As biometric technology continues to evolve, the R308 Fingerprint Sensor stands as a testament to the advancements in secure and convenient authentication systems, paving the way for a safer and more efficient future.